Useful JVM tunings

Categories of Java HotSpot VM Options

Standard options recognized by the Java HotSpot VM are described on the Java Application Launcher reference pages for Windows, Solaris and Linux. This document deals exclusively with non-standard options recognized by the Java HotSpot VM:

* Options that begin with -X are non-standard (not guaranteed to be supported on all VM implementations), and are subject to change without notice in subsequent releases of the JDK.
* Options that are specified with -XX are not stable and are not recommended for casual use. These options are subject to change without notice.

Some Useful -XX Options

Default values are listed for Java SE 6 for Solaris Sparc with -server. Some options may vary per architecture/OS/JVM version. Platforms with a differing default value are listed in the description.

* Boolean options are turned on with -XX:+<option> and turned off with -XX:-<option>.
* Numeric options are set with -XX:<option>=<number>. Numbers can include ‘m’ or ‘M’ for megabytes, ‘k’ or ‘K’ for kilobytes, and ‘g’ or ‘G’ for gigabytes (for example, 32k is the same as 32768).
* String options are set with -XX:<option>=<string>, are usually used to specify a file, a path, or a list of commands

Flags marked as manageable are dynamically writeable through the JDK management interface (com.sun.management.HotSpotDiagnosticMXBean API) and also through JConsole. In Monitoring and Managing Java SE 6 Platform Applications, The manageable flags can also be set through jinfo -flag.

The options below are loosely grouped into three categories.

* Behavioral options change the basic behavior of the VM.
* Performance tuning options are knobs which can be used to tune VM performance.
* Debugging options generally enable tracing, printing, or output of VM information.

1. Behavioral Options

Option and Default Value

Description
-XX:-AllowUserSignalHandlers    Do not complain if the application installs signal handlers. (Relevant to Solaris and Linux only.)

-XX:AltStackSize=16384    Alternate signal stack size (in Kbytes). (Relevant to Solaris only, removed from 5.0.)

-XX:-DisableExplicitGC    Disable calls to System.gc(), JVM still performs garbage collection when necessary.

-XX:+FailOverToOldVerifier    Fail over to old verifier when the new type checker fails. (Introduced in 6.)

-XX:+HandlePromotionFailure    The youngest generation collection does not require a guarantee of full promotion of all live objects. (Introduced in 1.4.2 update 11) [5.0 and earlier: false.]

-XX:+MaxFDLimit    Bump the number of file descriptors to max. (Relevant  to Solaris only.)

-XX:PreBlockSpin=10    Spin count variable for use with -XX:+UseSpinning. Controls the maximum spin iterations allowed before entering operating system thread synchronization code. (Introduced in 1.4.2.)

-XX:-RelaxAccessControlCheck    Relax the access control checks in the verifier. (Introduced in 6.)

-XX:+ScavengeBeforeFullGC    Do young generation GC prior to a full GC. (Introduced in 1.4.1.)

-XX:+UseAltSigs    Use alternate signals instead of SIGUSR1 and SIGUSR2 for VM internal signals. (Introduced in 1.3.1 update 9, 1.4.1. Relevant to Solaris only.)

-XX:+UseBoundThreads    Bind user level threads to kernel threads. (Relevant to Solaris only.)

-XX:-UseConcMarkSweepGC    Use concurrent mark-sweep collection for the old generation. (Introduced in 1.4.1)

-XX:+UseGCOverheadLimit    Use a policy that limits the proportion of the VM’s time that is spent in GC before an OutOfMemory error is thrown. (Introduced in 6.)

-XX:+UseLWPSynchronization    Use LWP-based instead of thread based synchronization. (Introduced in 1.4.0. Relevant to Solaris only.)

-XX:-UseParallelGC    Use parallel garbage collection for scavenges. (Introduced in 1.4.1)

-XX:-UseParallelOldGC    Use parallel garbage collection for the full collections. Enabling this option automatically sets -XX:+UseParallelGC. (Introduced in 5.0 update 6.)

-XX:-UseSerialGC    Use serial garbage collection. (Introduced in 5.0.)

-XX:-UseSpinning    Enable naive spinning on Java monitor before entering operating system thread synchronizaton code. (Relevant to 1.4.2 and 5.0 only.) [1.4.2, multi-processor Windows platforms: true]

-XX:+UseTLAB    Use thread-local object allocation (Introduced in 1.4.0, known as UseTLE prior to that.) [1.4.2 and earlier, x86 or with -client: false]

-XX:+UseSplitVerifier    Use the new type checker with StackMapTable attributes. (Introduced in 5.0.)[5.0: false]

-XX:+UseThreadPriorities    Use native thread priorities.

-XX:+UseVMInterruptibleIO    Thread interrupt before or with EINTR for I/O operations results in OS_INTRPT. (Introduced in 6. Relevant to Solaris only.)

2. Performance Options

Option and Default Value
Description
-XX:+AggressiveOpts    Turn on point performance compiler optimizations that are expected to be default in upcoming releases. (Introduced in 5.0 update 6.)

-XX:CompileThreshold=10000    Number of method invocations/branches before compiling [-client: 1,500]

-XX:LargePageSizeInBytes=4m    Sets the large page size used for the Java heap. (Introduced in 1.4.0 update 1.) [amd64: 2m.]

-XX:MaxHeapFreeRatio=70    Maximum percentage of heap free after GC to avoid shrinking.

-XX:MaxNewSize=size    Maximum size of new generation (in bytes). Since 1.4, MaxNewSize is computed as a function of NewRatio. [1.3.1 Sparc: 32m; 1.3.1 x86: 2.5m.]

-XX:MaxPermSize=64m    Size of the Permanent Generation.  [5.0 and newer: 64 bit VMs are scaled 30% larger; 1.4 amd64: 96m; 1.3.1 -client: 32m.]

-XX:MinHeapFreeRatio=40    Minimum percentage of heap free after GC to avoid expansion.

-XX:NewRatio=2    Ratio of new/old generation sizes. [Sparc -client: 8; x86 -server: 8; x86 -client: 12.]-client: 4 (1.3) 8 (1.3.1+), x86: 12]

-XX:NewSize=2.125m    Default size of new generation (in bytes) [5.0 and newer: 64 bit VMs are scaled 30% larger; x86: 1m; x86, 5.0 and older: 640k]

-XX:ReservedCodeCacheSize=32m    Reserved code cache size (in bytes) – maximum code cache size. [Solaris 64-bit, amd64, and -server x86: 48m; in 1.5.0_06 and earlier, Solaris 64-bit and and64: 1024m.]

-XX:SurvivorRatio=8    Ratio of eden/survivor space size [Solaris amd64: 6; Sparc in 1.3.1: 25; other Solaris platforms in 5.0 and earlier: 32]

-XX:TargetSurvivorRatio=50    Desired percentage of survivor space used after scavenge.

-XX:ThreadStackSize=512    Thread Stack Size (in Kbytes). (0 means use default stack size) [Sparc: 512; Solaris x86: 320 (was 256 prior in 5.0 and earlier); Sparc 64 bit: 1024; Linux amd64: 1024 (was 0 in 5.0 and earlier); all others 0.]

-XX:+UseBiasedLocking    Enable biased locking. For more details, see this tuning example. (Introduced in 5.0 update 6.) [5.0: false]

-XX:+UseFastAccessorMethods    Use optimized versions of Get<Primitive>Field.

-XX:-UseISM    Use Intimate Shared Memory. [Not accepted for non-Solaris platforms.] For details, see Intimate Shared Memory.

-XX:+UseLargePages    Use large page memory. (Introduced in 5.0 update 5.) For details, see Java Support for Large Memory Pages.

-XX:+UseMPSS    Use Multiple Page Size Support w/4mb pages for the heap. Do not use with ISM as this replaces the need for ISM. (Introduced in 1.4.0 update 1, Relevant to Solaris 9 and newer.) [1.4.1 and earlier: false]

-XX:+StringCache    Enables caching of commonly allocated strings.

-XX:AllocatePrefetchLines=1    Number of cache lines to load after the last object allocation using prefetch instructions generated in JIT compiled code. Default values are 1 if the last allocated object was an instance and 3 if it was an array.

-XX:AllocatePrefetchStyle=1    Generated code style for prefetch instructions.
0 – no prefetch instructions are generate*d*,
1 – execute prefetch instructions after each allocation,
2 – use TLAB allocation watermark pointer to gate when prefetch instructions are executed.

3. Debugging Options

Option and Default Value
Description
-XX:-CITime    Prints time spent in JIT Compiler. (Introduced in 1.4.0.)

-XX:ErrorFile=./hs_err_pid<pid>.log    If an error occurs, save the error data to this file. (Introduced in 6.)

-XX:-ExtendedDTraceProbes    Enable performance-impacting dtrace probes. (Introduced in 6. Relevant to Solaris only.)

-XX:HeapDumpPath=./java_pid<pid>.hprof    Path to directory or filename for heap dump. Manageable. (Introduced in 1.4.2 update 12, 5.0 update 7.)

-XX:-HeapDumpOnOutOfMemoryError    Dump heap to file when java.lang.OutOfMemoryError is thrown. Manageable. (Introduced in 1.4.2 update 12, 5.0 update 7.)

-XX:OnError=”<cmd args>;<cmd args>”    Run user-defined commands on fatal error. (Introduced in 1.4.2 update 9.)

-XX:OnOutOfMemoryError=”<cmd args>;
<cmd args>”     Run user-defined commands when an OutOfMemoryError is first thrown. (Introduced in 1.4.2 update 12, 6)

-XX:-PrintClassHistogram    Print a histogram of class instances on Ctrl-Break. Manageable. (Introduced in 1.4.2.) The jmap -histo command provides equivalent functionality.

-XX:-PrintConcurrentLocks    Print java.util.concurrent locks in Ctrl-Break thread dump. Manageable. (Introduced in 6.) The jstack -l command provides equivalent functionality.

-XX:-PrintCommandLineFlags    Print flags that appeared on the command line. (Introduced in 5.0.)

-XX:-PrintCompilation    Print message when a method is compiled.

-XX:-PrintGC    Print messages at garbage collection. Manageable.

-XX:-PrintGCDetails    Print more details at garbage collection. Manageable. (Introduced in 1.4.0.)

-XX:-PrintGCTimeStamps    Print timestamps at garbage collection. Manageable (Introduced in 1.4.0.)

-XX:-PrintTenuringDistribution    Print tenuring age information.

-XX:-TraceClassLoading    Trace loading of classes.

-XX:-TraceClassLoadingPreorder    Trace all classes loaded in order referenced (not loaded). (Introduced in 1.4.2.)

-XX:-TraceClassResolution    Trace constant pool resolutions. (Introduced in 1.4.2.)

-XX:-TraceClassUnloading    Trace unloading of classes.

-XX:-TraceLoaderConstraints    Trace recording of loader constraints. (Introduced in 6.)

-XX:+PerfSaveDataToFile    Saves jvmstat binary data on exit.

source http://www.oracle.com/technetwork/java/javase/tech/vmoptions-jsp-140102.html


Thanks
R Vashi

2 thoughts on “Useful JVM tunings

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s